Smart CO2 Controller Dual Channel NDIR CO2 Sensor Day Night Carbon Dioxide Detector 0-5000PPM For Greenhouse Hydroponics

$256.52
$256.52
$356.56
sold out
 
Color
AGc30 EU Plug
AGc30 US Plug
Dual Black Green EU
Dual Black Green US
Dual Black Orange EU
Dual Black Orange US
Dual Black White EU
Dual Black White US
Dual White EU
Dual White US
EU PLug
S Black Green EU
S Black Green US
S Black Orange EU
S Black Orange US
S Black White EU
S Black White US
Single White EU
Single White US
US Plug
Quantity
- +

   

SPECIFICATIONS

Battery Included: No

Certification: CE

DIY Supplies: Electrical

Gas Type: Co2

High-concerned chemical: None

Is Smart Device: No

Measurement Range: Cable 4.6 meters long

Model Number: CO2 Controller Monitor

With LCD Screen Or Not: Yes

semi_Choice: yes

Smart CO2 Controller Dual Channel NDIR CO2 Sensor Day Night Carbon Dioxide Detector 0-5000PPM For Greenhouse Hydroponics


This ready-to-install CO2 (Carbon Dioxide) Controller is equipped with a dual channel low drift NDIR sensor 4.6-meter long cable. Simple, affordable, and your best solution for more accurate control and monitor CO2 levels in a Greenhouse, residential, hydroponics, mushroom farm, plant factory, and so on.



Features:

  • CO2 controller/tracer

  • Built-in Day / Night Photo-Cell sensor

  • Chart with variable time zoom levels

  • 2-Channel low drift NDIR sensor for more accurate CO2 reading

  • Split-type remote sensor with 4.6-meter long cable

  • Foolproof "Hold Home" function

  • Ready to use no initial setup or calibration needed

  • 3 built-in main parameters (constantly display on screen):

  • Ambient Carbon Dioxide

Set Center value

Set Zone Value

  • MAX /MIN Display



Specifications:

(Typical test conditions, unless otherwise specified: Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meter)

  • CO2 Measurement :

Measurement Range: 0~5000ppm

Accuracy:

Accuracy at 0~3000ppm: ±50ppm or ±5% of reading, whichever is greater

Accuracy over 3000ppm: ±7%

  • Display Resolution: 1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)

  • Response Time: <2min for 63% of step change or <4.6min for 90% step change

  • Warm-up Time: <30 sec

  • Power input: AC 100 ~ 240 VAC

  • Operating Temperature: 32~122°F (0~50°C)

  • Storage Temperature: -4~140°F (-20~60°C)

  • Operating & Storage RH: 0~95%, non-condensing

  • Dimension:

Sensor Unit: 153*33*27mm (6.0*1.3*1.1inch)

Control Unit: 195*145*44mm195 (7.7*5.7*1.7inch)

  • Package Weight: 1293g


Package Included:

  • 1 x CO2 Controller unit

  • 4 x Screws

  • English User Manual

  • Standard Factory Packaging